How to Change Dirt Bike Tire?
How to Change Dirt Bike Tire?
How to Change Dirt Bike Tire? It is important to follow proper safety precautions and manufacturer guidelines when changing a dirt bike tire, and it may be helpful to consult a professional or experienced mechanic for assistance.
To change a dirt bike tire, you will need to:
- Remove the wheel from the dirt bike
- Deflate the tire completely
- Use tire irons or spoons to remove the tire from the rim
- Remove the inner tube from the tire
- Install the new tire onto the rim
- Install the inner tube into the new tire
- Use tire irons or spoons to mount the tire onto the rim
- Inflate the tire to the recommended pressure
- Reinstall the wheel onto the dirt bike
Remove Dirt Bike Wheel
To remove the wheel from a dirt bike, you’ll need some basic tools such as a socket wrench, a torque wrench, and a stand to support the bike. Here are the steps to follow:
- Shift the bike into neutral and secure it with the stand.
- Locate the axle bolts that secure the wheel to the bike frame.
- Use the socket wrench to loosen the bolts. Be careful not to lose the spacers or washers that are on the bolts.
- Once the bolts are loose, you can remove the wheel from the bike by pulling it straight out from the fork legs.
- Repeat the process for the other side of the bike if you’re removing both wheels.
Note: Before you start, it’s a good idea to check the manufacturer’s specifications for the proper torque settings for the axle bolts.
This will ensure that you tighten the bolts to the correct tension when you reinstall the wheel.
2. Deflate the tire completely
Remove the valve cap, press the center pin in the valve to release the air, and wait for the tire to deflate completely.
3. Tire Removal Using Irons
Tire irons or spoons can be used to remove a tire from a rim. These tools are inserted between the tire and the rim to pry the tire away from the rim, making it easier to remove.
However, it’s important to use caution when using tire irons or spoons to avoid damaging the tire or rim.
It’s recommended to use specialized tire-changing tools and techniques, or seek the help of a professional tire technician, to avoid potential injury or damage.
4. Remove the Inner Tube
To remove the inner tube from the tire, follow these steps:
- Deflate the tire completely by pressing down on the valve stem and releasing the air.
- Use a tire lever to pry the bead of the tire away from the rim on one side of the wheel.
- Once the bead is loose, reach inside the tire and pull out the inner tube.
- Remove the valve stem from the rim by unscrewing the nut and pulling the stem out of the rim.
- If you need to replace the inner tube, remove it from the tire completely and discard it. If you’re repairing a puncture, locate the hole in the tube and patch it according to the patch kit instructions.
5. Install The New Tire Onto The Rim
To install a new tire onto a rim, follow these steps:
- Remove the old tire from the rim, if necessary.
- Clean the rim to ensure there is no dirt or debris that could interfere with the tire installation.
- Lubricate the rim with a small amount of tire mounting lubricant.
- Place the tire onto the rim, making sure the bead (the inner edge of the tire) is seated properly on the rim.
- Use a tire machine or tire iron to carefully pry the tire over the rim, being careful not to damage the tire or rim.
- Inflate the tire to the recommended pressure and check that the tire bead is properly seated on the rim.
It’s recommended to have a professional tire technician or mechanic perform this installation to ensure it is done correctly and safely.
6. Installing an Inner Tube into a New Tire
Installing an inner tube into a new tire can be a bit tricky, but with the right tools and techniques, it can be done easily. Here are the general steps to follow:
- First, ensure that the inner tube you are using is the correct size for the tire you have. The size of the tube should match the size of the tire. You can usually find this information on the side of the tire.
- Deflate the tire completely and remove it from the wheel. This will allow you to access the inside of the tire.
- Check the inside of the tire for any sharp objects or debris that could puncture the inner tube. Remove any objects you find.
- Insert the inner tube into the tire, making sure that it is positioned evenly all around. It’s a good idea to inflate the tube just enough to give it shape, but not so much that it becomes rigid and difficult to work with.
- Starting at the valve stem, tuck the inner tube into the tire all around the rim. Make sure that the tube is not twisted or bunched up at any point.
- Once the tube is in place, carefully insert the valve stem through the hole in the rim, making sure that it is straight and not at an angle.
- Now you can start to mount the tire back onto the wheel, working in a circular pattern from one side of the tire to the other. Be sure to take care not to pinch the inner tube between the tire and the rim.
- Once the tire is mounted, inflate it slowly and check that the bead of the tire is sitting properly on the rim all the way around. Check that the tire is properly seated and not bulging or uneven.
- Finally, inflate the tire to the recommended pressure, which can also be found on the side of the tire.
With these steps, the inner tube should be installed properly in the new tire, ready to be used.
7. Use Tire Irons or Spoons to Mount the Tire Onto The Rim
Tire irons or spoons can be used to mount a tire onto a rim.
These tools help to pry the tire over the lip of the rim, making it easier to secure the tire in place.
It is important to use caution when using tire irons or spoons, as they can damage the tire or rim if not used properly.
8. Inflate the tire to the recommended pressure
Please use a tire pressure gauge to measure the current pressure of the tire, then refer to the manufacturer’s recommendation for the correct pressure, and use an air pump to inflate the tire to that recommended pressure.
9. Reinstall the wheel onto the dirt bike
Reinstalling a wheel onto a dirt bike can be a bit tricky, but with the right tools and approach, it can be done easily. Here are the general steps you can follow:
- First, make sure that the dirt bike is properly supported and that the weight is evenly distributed. You can use a bike stand or a jack to lift the bike off the ground.
- Next, remove the axle nut from the wheel you are reinstalling. Depending on the bike, you may also need to remove the axle bolt or pinch bolts that hold the axle in place.
- Carefully slide the wheel out of the frame, making sure to support it as you do so. Place the wheel on a clean and level surface, taking care not to damage the brake rotor or sprocket.
- If you are replacing a tire or tube, now is the time to do so. Otherwise, inspect the wheel and clean it if necessary.
- Carefully align the wheel with the axle and slide it back into place in the frame. Make sure that the brake rotor is properly aligned with the caliper and that the sprocket lines up with the chain.
- Reinsert the axle and tighten it down. If there are pinch bolts, tighten them as well. Make sure that the axle is torqued to the manufacturer’s specifications.
- Finally, reinstall the axle nut and tighten it down. Double-check that everything is secure and properly aligned before lowering the bike back onto its wheels.
Overall, reinstalling a wheel onto a dirt bike is not too difficult as long as you take your time and pay attention to the details.
If you are unsure about any step, consult your bike’s owner’s manual or seek help from a qualified mechanic.
What tools do you need to change a dirt bike tire?
To change a dirt bike tire, you will need the following tools.
A set of two or three tire irons will be necessary to remove the old tire from the rim and install the new tire.
Valve core tool
This tool will allow you to remove the valve core from the valve stem and deflate the tire.
A bead breaker is used to loosen the tire from the rim by breaking the bead of the tire.
Rim protectors help to prevent damage to the rim when using the tire iron.
A lubricant such as dish soap or tire lubricant can be applied to the tire and rim to make it easier to remove and install the tire.
An air compressor will be needed to inflate the new tire to the recommended pressure.
Tire pressure gauge
You will need a tire pressure gauge to ensure that the tire is inflated to the correct pressure.
It is important to note that changing a dirt bike tire can be a difficult task, especially for beginners, and it may be best to seek the assistance of a professional mechanic if you are not confident in your ability to complete the task safely.